Purchasing a new furnace may not be a concern right away. But it’s wise to learn the things that will likely impact your selection when you’re ready to buy. Here are seven things you’ll want to consider when you're due for furnace replacement in Belleville.
1. Size and Installation Quality
To run at peak efficiency and comfort, your furnace must be properly sized for your home. When it involves furnaces, bigger is certainly not better. We often get requests from customers to install a big furnace in the misguided belief that a larger furnace is either more dependable or will offer better comfort.
The reverse is true. Large furnaces will short cycle, or continuously turn on and off. This leaves you cold, with more expensive energy bills and a furnace that could wear out much sooner.
This is why it’s crucial to work with the right company when purchasing a new furnace. Even if it’s the right size but installed wrong, the U.S. Department of Energy says you could forfeit as much as 30% of your energy efficiency.
Another key component of installation is ductwork. If yours is old or improperly designed, you might have problems with noise or comfort. A furnace is only as effective as the duct system it’s attached to.
At D&K Home Services by Enercare, our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various types of home comfort systems. In addition to technical skill, our technicians are also trained in treating you fairly. We also support our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are ranked by a term called AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The greater the number, the less gas is spent during the heating process.
If your current furnace is 15 years old, it’s likely rated well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re wasting up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work now:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—highest efficiency rating available.
3. Blower Motor Technology
As you compare new furnaces there is one more important consideration: blower technology. This part circulates air throughout your home. And it also consumes a lot of electricity, so it’s important to know about your options.
There are three types of blowers available on furnaces today. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a traditional blower motor that’s been relatively unchanged for the past 30 years. This motor is the least expensive and also the least energy efficient.
- Constant torque motor. This technology finds a balance between cost and energy efficiency. It delivers an electrical efficiency boost over a traditional motor design.
- Variable-speed motor. The most energy-efficient furnaces can operate at different speeds. Instead of running at full blast 24/7, they will quietly operate at a low or medium speed at times. This helps enhance your comfort while keeping energy costs low, both in the winter and summer. And it also keeps indoor humidity in check.
4. Sound Reduction Technology
Sound has become a very important consideration with furnace installation, so another dramatic improvement has been keeping noise under control. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Nearly silent gas burners
With this technology, you might not even be aware that your furnace is on.
5. Smart Thermostat
You probably have a programmable thermostat, but it's quite possible you probably aren’t making the most of your energy savings. These thermostats can be difficult to program, especially if your schedule varies from day to day.
A smart thermostat removes all the guesswork about energy efficiency. Many models can learn from your temperature preferences and then create an energy-saving schedule to match. They also recognize when you’re home or away and will adjust your heating and cooling as needed.
As an extra perk, you’ll also be able to monitor and change your settings from just about anyplace on your phone. Some models can even notify you if they find a problem with your furnace or remind you when it’s time to change your air filter.
There’s a significant difference in furnace quality and reliability. Like any big purchase, we think it’s wisest to go with a major brand name. With a top brand like Lennox® or Goodman®, you’ll have more assurance in the technology and that the manufacturer will uphold its product warranty over the long term.
Furnaces typically have two main warranty coverage areas:
- Heat exchanger. This is the center of the furnace and the costliest component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can vary based on the manufacturer and furnace model.
- Main components. This involves the blower motor, electronic controls, ignitors and other key parts. Warranties can range from as little as a one-year limited warranty to as much as a 10-year limited warranty.
When going over warranty coverage, it’s essential to know it's limited. So, you should make sure you get the limitations. For example, nearly all standard manufacturer warranties only cover the cost of the replacement part, not labor. And labor on a new heat exchanger could get costly.
Once your new furnace is installed, make sure you complete the product registration immediately. Many manufacturers may limit the warranty term if the product registration is not completed. This step is simple and typically only takes a few minutes.
How much does all this cost anyhow? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency model.
As you consider these costs and the impact to your budget, keep in mind that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it provides.
A couple of additional ways to save include:
- Replacing your air conditioner simultaneously.
- Buying at the ideal time, such as in early fall, mid-winter and early spring. You may be able to get additional discounts and rebates during this slower season.
- Take advantage of rebates from the federal and state government, as well as from your local utility provider. We can help you navigate this process.
- Finance your new furnace or enroll in our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to search for in a new furnace, when should you replace your old one? Here are a few tips from our Experts that will help you make that decision.
Heating systems typically last 15–20 years. How long yours will keep going depends on whether you’ve kept up with furnace maintenance, where you live and your temperature preferences. If you’re in a place with harsh winters, your furnace will operate more frequently, potentially making it wear out sooner. The same applies if you like to keep your home at a warmer temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces get older, the potential for frequent furnace repair increases. If your system is more than 15 years old, those repairs can be particularly expensive. Common and costly repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are more than the half the cost of a new furnace, it’s generally recommended to replace it.
Furnaces older than 15 years can be very inefficient. You could be wasting as much as 30% of the money you spend to heat your home. Excessive energy costs and the desire to decrease energy use are also strong reasons to think about replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their utility bills.
Trust Your Furnace Replacement to the Experts
It can feel overwhelming trying to investigate furnace features on your own. Or recognize exactly when you should get a new furnace. Our D&K Home Services by Enercare Experts are here to make the process much smoother. Call us at 613-707-2421 or schedule an appointment online to request your free home comfort assessment now.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.